|
When choosing a mask, it is best for you to try on the mask before buying. Put on the mask, and inhale through your nose. Make sure you don’t have any hair stuck at the skirt of the mask. Hold your breath and see if the mask stays on and not fall off. Check to see if air is leaking into the mask. If the mask falls off, it usually means the shape of the mask skirt isn’t suitable for your face shape. Try as many brands and models as possible.
Most new masks have a protective film on the window. This can cause fogging problems during your dives if the protective film isn’t cleaned away. Before diving with a new mask, clean the window with a recommended cleaner liquid or defogging liquid. If you can’t get hold of one, try rubbing some clothing powder detergent onto the window and soaking your mask in water mixed with clothing powder detergent and leave it overnight. Cleaning your mask before the first dive is very important.
Have you ever felt the regulator in your mouth seeming to be pushing your mouth to the left during your dives? You know, the feeling that if you don’t bite hard enough on the mouthpiece, the regulator might just get pushed out of your mouth? If you don’t own an octopus with built in swivel at the regulator, or don’t have a first stage swivel, you might experience this discomfort. One way to fix this is to buy and fit in a regulator 2nd stage ball swivel. Another way quite useful is to turn the air tank slightly in the clockwise direction. As you assemble the Buoyancy Control Device (BCD) to the compressed air tank, with the BCD facing away from you, instead of having the K-valve face directly away from you, turn the tank clockwise by about 30° so that the K-valve is pointing slightly to the right before securing the BCD to the tank. You should be able to feel the difference.
If you regularly do boat and shore dives, we recommend that you get a pair of booties and open heel diving fins. Having booties on as you enter the sea from the shore will protect your feet from sharp corals and stones from cutting your feet. You can walk comfortably to a certain depth before putting your fins and begin your dive. On the boat, you will at least minimize your chances of slipping on the wet floor.
For open heel fins with those removable buckles, the best way to put on your fins is to slip the strap over your heels. While to take them off, by slipping the strap under your heels and removing the fins.
At the end of your boat dive, when you take off your gear before climbing on to the boat, always take off your weight belt first, then your BCD and lastly, your fins.
Jump
Into Scuba Diving For Fun And Adventure |
Tips
| Tips
II | Scuba
Diving Gear |
Exciting
Scuba Diving Vacations |
Galapagos
Islands Diving Tips | Planning
A Scuba Diving Trip
|
